Zippity OCEANSIDE - Step 4: Install U-Channels; Step 4.1; Step 4.2; Step 5: Assemble Side Panels

WWW.ZIPPITY-OUTDOOR.COM
6
ASSEMBLY INSTRUCTIONS
ZP19024
(H) between
the two Rail Brackets. Ensure the
groove of the U-Channel is centered

Steel Screws (N) through the pre-drilled
holes in the U-Channel.
(K) into Rail Brackets with the

Repeat step 4.1 for the rest of
the Posts.
STEP 4: INSTALL 
STEP 4.1
STEP 5.1
STEP 4.2
STEP 5: ASSEMBLE SIDE PANELS
H
N
Note: Push the Horizontal

Rail Bracket. The screw head

but with enough force, the
Horizontal Rail should pop
into the Rail Bracket.
Note: Angle the screw
either slightly down or

internal rail rib.
Post B
Post A
K