Zippity OCEANSIDE - Step 5.2; Step 5.3; Step 5.4

WWW.ZIPPITY-OUTDOOR.COM
7
ASSEMBLY INSTRUCTIONS
ZP19024
(G) into
Horizontal Rail then insert the Privacy
Board into the U-Channel. Angle the
Privacy Board as illustrated. This will
make it easier to get the Privacy Board
into the U-Channel. Insert the last
Privacy Board in the same fashion.


Repeat steps 5.1 through 5.4 to assemble the other wall panel.
Slide the middle Privacy Board in

STEP 5.2 STEP 5.3
Note: Make sure
the Horizontal Rail
is inserted fully
over the Privacy
Boards and rests
inside the Rail
Brackets.
Tip: 
to slip together more easily if necessary.
G
STEP 5.4