Zippity OCEANSIDE - Step 6: Install Shower Rods and Beams; Step 6.1; Step 6.2; Step 7: Install Post Caps

WWW.ZIPPITY-OUTDOOR.COM
8
ASSEMBLY INSTRUCTIONS
ZP19024
STEP 6: INSTALL SHOWER RODS AND BEAMS

(E) onto each
Post as shown.
Slide (2) Shower Rods (L) into the

they hit the back wall of the Posts.
STEP 7.1
STEP 6.1
STEP 7: INSTALL POST CAPS
Slide (2) Beams (I) into the larger routed holes in the
Posts. Align the pre-drilled holes in the Beams and

STEP 6.2
Apply a small amount of Vinyl Weld Glue (P) to the
(F)

STEP 7.2
L
E
I
Align
side of Beam with
holes faces up
F
P