Zippity ZP19062 - Install Post Hinge Pieces; Step 3.1: Securing Post Hinge Piece; Step 3.2: Joining Panel to Post

WWW.ZIPPITY-OUTDOOR.COM
6
ASSEMBLY INSTRUCTIONS
ZP19062
E
STEP 3: INSTALL POST HINGE PIECES
STEP 3.1



STEP 3.2
1. Insert (1) Post Hinge Piece (B) (E). Use
Spacer (K) 
of the post.
2. 
(J) into the edge of the post
to secure the post hinge.
K
J
1 2
B
Note: The spacer
can be removed
aer screw is put in.