Zippity ZP19062 - Step 3.3: Aligning Top Rail Hinge; Step 3.4: Repeating for Additional Panels

WWW.ZIPPITY-OUTDOOR.COM
7
ASSEMBLY INSTRUCTIONS
ZP19062
STEP 3.3
STEP 3.4
not included
21
Repeat steps 3.1 through step 3.3 using the post from an
Post (Item SKU: ZP19063) to end the run. Ensure that the
spacer is used to achieve consistent hinge height.
1. Slide the remaining post hinge piece up
the post channel to align with the top rail.
2. Drive (1) 2 1/2" self-drilling stainless steel
screw into the edge of the post to secure
the post hinge.
Note:
addional panel, or the Zippity Hinged Portable Finishing