30
SETTING COUNTDOWN VALUES
Press the MODE button repeatedly to select the parameter you want to base your training
on: time, distance, calories, or the upper heart rate value.
(The display should show only the parameter, without the SCAN option.)
Press SET multiple times to set the value.
The countdown starts when you start pedalling. A down arrow will be displayed on the screen.
When the countdown is over, or you reach the set heart rate value, the device makes a
sound.
PULSE RATE
Press MODE until the display shows PULSE.
Put both your hands on the heart rate sensors on the handlebar. During the measurement,
the computer displays a heart icon.
The computer displays the current heart rate after three to four seconds.
ATTENTION! The results are approximated and must not be used for any medical purposes.
AUTO ON/OFF
The computer is switched on when the flywheel moves or any button is pressed.
The computer is switched off after four minutes of inactivity.
POWER SUPPLY
2 AAA or UM4 batteries
Operating temperature 0°C to +40°C (32°F – 104°F)
Storage temperature: -10°C to +60°C (14°F – 140°F)
Computer (model): MRSM03-GRN
To Next Page
Loading...
Need help?
General
