C2-260/inBio2-260 Access Control Panel
User Manual
Page | 40 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
View Rules of Devices
Shows the Access rules in the device.
View Device Capacity
It displays the capacity of personnel’s biometric details in the device.
Modify IP Address
Select a device and click [Modify IP address] to open the modification interface. It will obtain a real-time
network gateway and subnet mask from the device. (Failed to do so, you cannot modify the IP address).
Then enter a new IP address, gateway, and subnet mask. Click OK to save and quit. This function is similar
to [Modify IP Address Function] in Device
.
To Next Page
