Need help?Do you have a question about the ZKTeco C3 Pro and is the answer not in the manual?
General| Model | C3 Pro |
|---|---|
| Communication Interface | TCP/IP, RS485 |
| User Capacity | 30, 000 |
| Card Capacity | 30, 000 |
| Wiegand Input | 1 |
| Auxiliary Input | 2 |
| Power Supply | 12V DC |
| Dimensions | 200mm x 130mm x 40mm |
| Relay Output | 2 |
| Operating Humidity | 20% to 80% |
| Access Control Mode | Standalone |
Diagram illustrating the power connection without a backup battery.
Diagram illustrating the power connection with a backup battery.
Details on wiring a lock using an external power source.
Wiring for normally open locks using terminal power.
Wiring for normally closed locks using terminal power.
Details for connecting auxiliary inputs to the device.
Details for connecting auxiliary outputs from the device.
Instructions for connecting via a Local Area Network (LAN).
Steps for establishing a direct network connection to a PC.
Procedure to reset the device to factory default settings.
Setting the unique address for RS485 communication.
Configuring the RS485 termination resistance using DIP switches.
To Next Page
