3
Ethernet Connection
Power Connection
Recommended AC Adapter
1) 12V ± 10%, at least 1500mA.
2)
To share the power with other devices, use an AC Adapter with higher current
ratings.
Click on [COMM.] > [Ethernet] > [IP Address] , input the IP address and click on [OK].
Note: In LAN, the IP addresses of the server (PC) and the device must be in the
same network segment when connecting to the ZKBioAccess IVS software.
IP address: 192.168.1.130
Subnet mask: 255.255.255.0
Default IP address: 192.168.1.201
Subnet mask: 255.255.255.0
Connect the device and computer software over an Ethernet cable. As shown in the
example below:
ZKBioAccess IV S