Need help?Do you have a question about the ZKTeco SCR-100 Plus and is the answer not in the manual?
General| Model | SCR-100 Plus |
|---|---|
| Device Type | IP Access Controller |
| Card Capacity | 30, 000 |
| User Capacity | 30, 000 |
| Fingerprint Capacity | 10, 000 |
| Log Capacity | 100, 000 |
| Operating Voltage | DC 12V |
| Communication | TCP/IP, RS485 |
| Input Port | 2 |
| Power Supply | 12V DC |
| Operating Humidity | 20% to 80% |
| Access Control Interface | RS-485 |
| Operating Temp | -10°C to 60°C |
Details the ZKTECO SCR100 Plus as a TCP/IP based access controller and reader without screen or keypad.
Explains how the PC software communicates with the device via TCP/IP, detailing direct and switch-based Ethernet connections.
Process for registering new devices into the access control system.
Instructions for registering personnel information and their associated access cards into the system.
Configuration options for managing access levels, time zones, and other control parameters.
Methods for transferring user data and attendance records between the PC and devices.
To Next Page