ZKTeco FR1200 Installation And Wiring Guide

Version:1.0 Date: Oct. 2011
FR1200 Installation & Wiring Guide
Reader+Access Control Wiring View
Access Control
WD 0
WD 1
GND
RXD
TXD
GND
IND 0
IND 1
GND
BEEP
GLED
RLED
+12V
RXD
TXD
USB+
USB-
FR1200 terminal
GND
+12V
485+
485-
GND
485A( )
+
485B( )-
Wiri ng Hole
Instru ctio n for the Mo unti ng Paper
Before t he dev ice is fas tene d, pleas e
stick th e pape r to the pla ce whe re you
want to in stal l it, then m ake ho les and
lay cabl es acc ording t o the mo unting
paper.
FRT Read er Moun ting P aper
(onl y for yo ur refer ence )
Fixi ng Hole
Fixi ng Hole
(1) Post the mounting template
on the wall.Drill the holes
according to the marks on
(2) Remove the screw
(3) Take away the
on the bottom of
the template(holes for screws
and the back plate
(4) Fix the plastic pad
mounting paper.
and wiring).
device.
back plate.
on the wall ingaccord
to the
(5) Tighten the screw
on the bottom, fix
the device to the
back plate.
1. Install Device
2. Work Principle
(1) Connection with host machine
The device can only be used as reader. It cannot dispose the obtained information. Therefore, it needs connecting host machine to obtain
fingerprint information and transmit it to host machine for disposal through RS485. The host machine is specified access control terminal
Please power off the device before connection . Connection under power-on state which you can consult the commercial representative.
may bring great damage to the device.
The terminal definition table of the host machine
(2)The terminal definition table of Reader
Wiegand D0 output
Wiegand D1 output
GND
RS 232 output
RS 232 input
485 communication-
485 communication+
Function
NO.
Signal output of buzzer
Function
NO.
Terminal
name
BEEP
1
Signal output of green indicator
Wiegand D0 input
Wiegand D1 input
GND
12V power output
RS 232 input
RS 232 output
USB communication-
USB communication+
Signal output of red indicator
IND 0
IND 1
GND
GLED
RLED
+12V
RXD
USB+
TXD
USB-
3
4
2
5
6
7
8
9
10
11
WD 0
WD 1
GND
RXD
TXD
1
3
4
2
5
GND
3
4
5
Terminal
name
1
3
4
2
5
GND
+12V
485-
485+
GND
Terminal
name
NO.
Function
485 communication+
485 communication-
Power GND
12V power output
Signal GND
GND
485A( )
+
485B( )-

ZKTeco FR1200 Specifications

General

Type	Basic access control reader
Product color	Black
Access code reader	-
Fingerprint reader	Yes
Authentication type	Biometric
International Protection (IP) code	IP65
Operating temperature (T-T)	0 - 45 °C
DC voltage range	12 - 12 V
Processor frequency	324 MHz
PC connected	No
RS-485 ports	1

Weight and Dimensions

Depth	37 mm
Width	50 mm
Height	102 mm