Need help?Do you have a question about the ZKTeco LH3000 and is the answer not in the manual?
Shows the components of the lock system with labels.
Visual identification of all included lock components and hardware.
Verify door thickness and select appropriate screws and spindles.
Determine and confirm the door's opening direction for proper lock installation.
Key warnings and recommendations for battery usage, handling, and initial setup.
Instructions for drilling necessary holes on the door according to measurements.
Steps to detach the mortise latch plate from the door.
Guide for inserting and aligning the mortise into the door.
Procedure for installing the lock cylinder into the mortise.
Steps to insert and secure the spindle through the lock mechanism.
Instructions for attaching the outdoor lock unit to the door.
Steps for securing the indoor lock unit to the door assembly.
Installing the battery pack and re-attaching the mortise latch plate.
Marking and drilling holes in the door frame for the strike plate.
Performing a test to ensure the lock operates correctly with the mechanical key.
To Next Page
General
