ZKTeco LH3000 - Door Preparation; Check Door Thickness and Spindles; Check Door Open Direction

3
Door Preparation
1. Check door thickness, prepare the proper screws and spindles.
Note: Please install the mortise (F) and strike plate (L) according to the above pictures.
L
L
L
L
F
F
F
F
Left inward Right inward
Left outward Right outward
2. Check door open direction.
Door Thickness E Spindles R Screws P Spindle
35-55 mm 40 mm 45 mm 67 mm
Note: If out of the door thickness of 35-55 mm,this lock will not be available.