3
5
Programming the Features through Menu Mode
Touch the keypad to activate the lock.
1)
Press the * + # key to access the menu.
2)
Verify the administrator's identity with his/her fingerprint or card, or by entering the
password then press the # key to confirm.
3)
Enter the digit corresponding to the function to be performed by following the audio
guide.
4)
Press and hold the Reset button for 5 seconds. The lock will beep for 5 times. Keep
holding the Reset button until you hear the audio prompt, please press # key to
confirm.
4
Register the First Administrator
Touch the keypad to activate the lock.
1)
Press the * # key to start the registration process. The user will hear a prompt “Please
register administrator, please enter fingerprint, password, access card, press star to
exit”.
2)
Press the fingerprint for five times, or enter the group password, or swipe the access
card.
3)
Proceed further according to prompts.
4)
Note:
The registered password can be of 6 to 12 digits.
The currently logged-in administrator cannot delete his/her admin data.
1)
2)
To Next Page
Loading...
Need help?
General
