ZKTeco UHF10F Pro Reader - Work Mode Configuration Options; RF Parameter Settings; Buzzer Notification Setup

U H F10 P r o R e a d e r
Us er Ma nu a l
P a g e | 11
C o p y r i g h t © 2021 Z K TE C O C O ., L T D . All r ig h t s r es er v ed .
Work Mode Configuration
Click Read Always to make the Reader always in the read status. Click Read by
Trigger to enable the reader to read only after it is triggered.
RF Settings
The RF Settings helps to set the Power and Frequency values.
Buzzer
Select the Buzzer check box to enable the Buzzer.