ZKTeco UHF10F Pro Reader - RS485 Communication Interface; RS485 Baud Rate Settings; RS485 Device Address Setup

U H F10 P r o R e a d e r
Us er Ma nu a l
P a g e | 14
C o p y r i g h t © 2021 Z K TE C O C O ., L T D . All r ig h t s r es er v ed .
5.1.2 RS485 Setting Interface
The controllers supported by default are inbio260 and inbio460.
Baud RateSetting
The default Baud rate is 96000 and it can be adjusted as per the requirements.
Device Address Setting
The Device Address Setting is used to distinguish the readers which are
installed in different locations.