4. How to use mechanical key ?
3. How to use emergency power?
9V Alkaline
Battery
(6LR61)
8
1.Key A is used for lock installer
and upfitter. After the
installation completed, the
owner check and take back Key
A, insert Key B into the keyhole
and rotate 90°, then Key A will
be unable to open the lock.
2.Key B is packed in the sealed
plastic wrap for safety, which is
used only for house owner.
Unlocking method: Please remove
the silicon stopper of the keyhole
first, then insert the key into the
keyhole and rotate 90° to left or
right, press the handle to unlock.
Notes: Key A and Key B are designed
for the property safety of the
house owner:
Caution: Please do not press down the
handle before rotating the key.
To Next Page
Loading...
Need help?
General
