27
Troubleshooting
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION
The dishes are not
clean enough
The water pressure is too low.
Make sure that the water
pressure is above 20 psi.
Use your dishwasher when
water demand is low.
The inlet water
temperature is too low.
Make sure that the
dishwasher is connected to
a hot water supply. If not,
change the water supply
to a hot water source. Use
your dishwasher when hot
water demand is low.
Dishes are too close together.
Reload the dishwasher
as shown in "Preparing
and Loading
Dishes" on page 9.
Improper use of detergent.
Add detergent depending
on the water hardness and
washing cycle you choose.
Use fresh detergent.
The selected cycle is not suitable
for the soil level on the dishes.
Choose a different cycle
with a longer washing time.
The spray arms are blocked.
Make sure that the spray
arms are not blocked and
are free to rotate.
TROUBLESHOOTING
To Next Page
