11
Preparing the Refrigerator Enclosure
PREPARATION FOR INSTALLATION AND CABINET CUTOUTS
• ZLINE RBIV built-in refrigerators are panel-ready appliances designed to be a permanent
kitchen fixture; therefore, precise cutouts and superior attention to detail are required for
seamless integration, especially if custom panels are installed. The most common scenario
is the unit is installed between two kitchen cabinets or decorative columns.
• The refrigerator comes with a 4" (102 mm) stainless steel toe kick installed to fit a standard
84" (2134 mm) tall cabinet.
• NOTE: Kitchen layouts may vary, so recommended dimensions must be confirmed by a
qualified technician before starting the installation.
CATEGORY RBIV30 RBIV36
A Width 30 3/16" (767 mm) 36 3/16" (919 mm)
BEFORE INSTALLATION
To Next Page
Loading...
