9
Tools Required
TOOLS REQUIRED
Tools to be used when installing the product are as follows (additional tools that may assist in
installation are not listed here):
TOOLS REQUIRED (NOT PROVIDED)
• Cordless Drill
• Safety Goggles
• 1/2" Wrench
• Hammer
• Ladder
• 3/32" Drill Bit
• 5/16" Drill Bit
• Box Cutter
• Socket Wrench
• Safety Gloves
• Tape Measure
• 1/4" Torx Bit
• 1/4" Flat Wrench
• 1/4" Hex Bit
• Level
• Dolly or Hand Truck
• Tape
ALTERNATIVES FOR INSTALLATION
• The product can be placed in various ways based on the kitchen design. It must be installed
at a place where it is ensured that the door can be opened and closed properly.
• If the doors cannot be opened 90° at least, you cannot completely open the drawers inside
the product. NOTE: The unit's hinges are designed to allow doors to open up to 115°.
SINGLE CABIN INSTALLATION METHODS
BEFORE INSTALLATION
To Next Page
Loading...
