8
Electrical Connection
VENTILATION
Ventilation panels where the air enters and exits the unit must not be blocked or obstructed. In addition,
you must periodically clean the dust and dirt that accumulates on the vent holes to ensure adequate
ventilation.
ELECTRICAL CONNECTION
• Never use an extension cable or cord with this unit.
• The dedicated electrical outlet receptacle for this unit must be grounded and checked by an
authorized electrician.
• The location of the electrical wiring must comply with the dimensions specified in this
installation manual.
CAUTION
RISK OF ELECTRIC SHOCK
Electrical grounding is necessary. This appliance is equipped with a 3-pin plug to
protect you against possible electric shocks.
• Do not remove the round grounding terminal from the plug.
• Do not use 2-pin grounding adapters.
• Do not use extension cables or cords to energize the product.
ATTENTION
Do not connect the grounding cable to any gas pipes. Please have the grounding
checked by a qualified electrician if you are not sure about the grounding of the
product. Do not install a fuse on the neutral line or grounding circuit.
Please wait 3-6 hours after installing the unit before plugging it in to protect it against
possible damages. This way, the refrigerant and the lubricants in the system are given
proper time to balance.
WARNING
WATER CONNECTION
The pressure of the main water supply must be in compliance with the values specified in this manual,
and the location of the water system must comply with the dimensions specified in this manual.
i
A bypass is recommended for the water filtering system if a reverse osmosis system
is used.
INFO
IMPORTANT SAFETY INSTRUCTIONS
To Next Page
Loading...
