2
Refrigerant Safety
R600A REFRIGERANT
This product contains R600a isobutane refrigerant, which is a very eco-
friendly natural gas. However, it is also flammable. Please follow the
warnings and installation instructions below:
• If the product has been transported horizontally, you must wait a minimum
of 4 hours after standing it upright before plugging it in.
• Cut-out dimensions of the installation area must be suitable to safely fit the
product for full installation.
• Dimensions, features, and position of objects used to support and affix the
product to this area must be suitable.
• Minimum clearances between product parts and surrounding structures
must be suitable.
• Minimum dimensions and proper organization of ventilation holes must
be observed.
• The product must be connected to the main power outlet, and corresponding
connections of other components must be suitable.
• The product must be able to be disconnected from the power supply if
needed after installation.
• The outlet or fuse must be accessible to disconnect the product.
• Extension cables or ungrounded (two-terminal) adapters must not be used
with this unit.
WARNING
ATTENTION
You must wear gloves and eye protectors when installing the product.
You must also take measures against high noise levels when using a drill to
drill into the floor or wall.
ATTENTION
Make sure that your product is suitable for your local codes.
ATTENTION
The product must be installed by a qualified technician according to the
installation instructions.
The product may tip over since it is quite heavy. For this reason, safety
precautions must be taken. The doors of the product must be kept closed
until it reaches the final install destination, and it must be transported in
accordance with the installation instructions.
WARNING
IMPORTANT SAFETY INSTRUCTIONS
To Next Page
Loading...
