Don't panic iF you encounter problems
N
o.
Problem
Solution
Model The drone motor can rotate,
. aircraft cannot lake off, Me ftgala
flash oulcIdy and slowly
Without turning off GPS, drone enables protection
2
After the GPS function is turned off in
Mode 1,1he drone motor can rotate and
are drone
cannot
take off. The lig.
flash gulddY and slowly
Reoelibnite the geomagnetism after resod
After take-off In Mode 1, Ow drone
keeps blinking end cannot hover.
The ground is . smooM and the enylmnroent Is . dark. wiCch
will cause Me op..
,
'
,
wt.. to he en... Merau get a good
11901 and fly In a place where .re la no reflect.n on. ground.
I
Affar
taking
off
In Made
2
. M. alone
keep banking end cannot hover.11
goats around T. remota control
always switches between Mode 1 and
Mode 2.
GPS positioning is net good, Interfenoce is . big, please get
open, unobsbucled, no high voltage cakes
5
Mode 2 The drone motor am rotate, the
env
-
en cannot take on, Yee V. lash
quickly and slowly
Recalibrate the geomagnetism after restart
S
Drone shakes a .
The blade la deformed or damaged, it needs to be replaced
0
When the picture 6 aged doling aerial
p5010 3905
Land the drone to a flat ground and perform the gimbal level
coma., egeirc
Software instruction manual
Software installation instructions
1
Install
the mobile client
Please scan the OR =Pe below to do.101 the roottle app to the corwsponding webs.
IOS
Android (Coo)
Android (google)
2. Connect Drone WW1
1.
Power on Me Mona;
2.
Find Pie drone hoMpot in
the
prone 'Settings-MAW,
o
the hoMpot network (no passer.). and the phone will connect automatically
-16-