5. Flight made switch
Long press Nis hey
for 5 seconds
Note: The default GPS mode (mode 2) of the product is lamed on. When the
drone does not reel. 8 satire., the arena an only unlock the motor but
cannot tare off. To take off, you need to switch the optical flow mode before
the satellite positioning Is completed. Press the record button for 5 seconds
(are switching method is shown on the right). After the snitch Is successful, the
remote control will emit a beep. At NM lime, the drone will not hare all
GPO-related functions Ione-clIck ream, low-power return, unoontrolled retum,
etc ) Pay attention to the flying height distance to avoid losing the drone(
Note • It Is not possible to siresh to optical now made after GPS positioning is
completed. To switch, you need to lum off the drone and remote control and restart
Al
r.
figural
Drone battery charging
111111.46iCh
-0
Use charging
adapter
Gable
(Purdmeel
Battery
eaparstelv)
Android (china)
Android , google
6. Drone unlock
this time, the Mrottle reck end the
directional stick ere pushed to the lower left
comer and the lower dght comer at Me same
time (Figure 1), or pushed to the lower right
comer
and the lower left comer (Figure 2) et
the same tree, the unlocking can be
completed, and gm motor con fly after
starling.
7. Drone and remote control battery replacement and charging
Drone battery removal method
Remote control
Press the battery lout era remore the betteo backwards.
battery replacement
Keep flngers and machine clean and dry before operation, otherwise the battery
Open the battery cover with o
may cot be slipped out.
Mr.( and install 4 AA
batteries
•
Insert the plug in the correct way.
•
It is recommended to use
5V 1-2A adapter for charging.
8. Know Your Remote APP
(1) Soon the OR code to download and install the APR and support GocoMIOS end Android.
To Next Page
Loading...