3. Press and hold for 5 seconds the menu button to enter the menu options.
If a regular time setting was preset (ex: MM:SS MM:SS, or HH:MM
HH:MM) then a flashing time display will be seen (ex: flashing 05:00
05:00).
4. Press the menu button one more time to enter "Quick Time Change"
mode or press any of the player buttons to enter the menu options. If in
"Quick Time Change" mode, make changes using the player buttons and
the menu button until time is set.
Note: A quick touch of any of the players' buttons is required to increment or
decrement the time by one unit. If the finger/hand is left touching the button
the time will keep changing. This feature was intentionally included in the
clock design to facilitate setting up the time in the unit.
2.2 Set Time in Hours and Minutes
1. Press the menu button to enter this mode when a flashing "HH:MM
HH:MM" is displayed. Time can be set in hours and minutes (HH:MM).
2. Use any of the player buttons to change the time and accept the settings
using the menu button.
2.3 Set Time in Minutes and Seconds
1. Press the menu button to enter this mode when a flashing "MM:SS
MM:SS" is displayed. Time can be set in minutes and seconds (MM:SS).
2. Use any of the player buttons to change the time and accept the settings
using the menu button.
5
To Next Page
Loading...
General