2.4 Set Delay
1. Press the menu button to enter this mode when a flashing "DEL F 00" is
displayed. A flashing "F" will be displayed ("F" is the default setting).
2. Use any of the players touch buttons to set the delay mode.
• F - Flashing: The display flashes back and forth between the delay
seconds and the actual clock time. This is the default setting from
factory.
• C - Countdown: Only shows the delay seconds counting down.
• t - Time only: Only shows the actual clock time.
3. Use any of the player buttons to set the number of seconds for the delay.
A maximum of 60 seconds can be programmed for this function.
4. Press the menu button to accept the settings.
5. Go to "PLAY - - - -" and press the menu button to start a new game.
2.5 Set Increment
1. Press the menu button to enter this mode when a flashing "INC - 00" is
displayed. A flashing "00" will be displayed.
2. Use any of the player buttons to set the number of seconds for the
increment. A maximum of 60 seconds can be programmed for this
function.
3. Press the menu button to accept the settings.
4. Go to "PLAY - - - -" and press the menu button to start a new game.
2.6 Set Tournament Modes
6
To Next Page
Loading...
General