Zmorph VX Quick Start Guide

You are ready to go. Proceed
further.
Open the front cover of the ma-
chine to the point where it touches
with the back cover. Magnetic
latches will keep the cover open.
Gently cut the tapes and
open ZMorph VX box.
Take out all containers with
accessories from the box.
Take out ZMorph VX from
the box. Remove side protec-
tive foams and foils.
Gently remove the worktable
protection foams.
Remove the protective tool
band.
1
4
7
2
5
3
6
Unboxing

Zmorph VX Specifications

General

Brand	Zmorph
Model	VX
Category	3D Printers
Language	English