Need help?Do you have a question about the Zmorph 2.0 S and is the answer not in the manual?
General| Technology | FDM (Fused Deposition Modeling) |
|---|---|
| Filament Diameter | 1.75 mm |
| Heated Bed | Yes |
| Build Volume | 250 x 235 x 165 mm |
| Nozzle Diameter | 0.4 mm (standard) |
| Filament Compatibility | PLA, ABS, PETG, HIPS, Nylon |
| Extruder Type | Single extruder |
| Connectivity | USB, SD Card |
| Software | Voxelizer |
| Power Supply | 24 V |
Essential safety guidelines for machine operation and user protection.
Steps to connect the printer via USB and driver installation.
Testing and verifying the movement of the printer's axes.
Calibrating the print bed for optimal first layer adhesion.
Performing a test to ensure the extruder is working correctly.
Using Voxelizer to import models and generate G-code files.
Procedure for clearing blockages from the printer's nozzle.
Methods and materials to improve print adhesion to the build plate.
Overview of the CNC milling function and DXF file import.
Diagnosing and resolving frequent problems with the printer.
Components covered by the warranty and service procedures.
To Next Page
