WARRANTY
81
WARRANTY
ZMorph personal fabricator is designed to be modular, and easy to service. In case of technical
diiculty with any of the parts, it can be easily removed and shipped to us for maintenance.
Warranty covers following components:
• STANDARD PLASTIC EXTRUDER MODULE WITH HEATED NOZZLE,
STEPPER MOTOR WITH PLANETARY GEARS,
TEMPERATURE SENSOR AND CARTRIDGE HEATER
• HEATED BED MODULE WITH KAPTON HEATER,
TEMPERATURE SENSOR, PLUG AND CABLES
• ELECTRONICS MODULE Z WITH ONBOARD - SD CARD
CONNECTORS AND FUSES FOR HEATERS AND MOTOR INPUTS
• MECHANICAL PARTS OF X, Y AND Z AXIS,
AS WELL AS STEPPER MOTORS
In case of technical fault caused by material wear or improper assem-
bly, if still in warranty period, user can send faulty module to ZMorph headqu-
aters, where it will be exchanged and shipped back as soon as possible.
Warranty covers 1 year from date of delivery and can be extended.
For any further questions about warranty please contact us at: contact@zmorph3d.com
For general info contact us at: support@zmorph3d.com
Elektroekooll company collects from us all electronic waste
and electronical equipment from 01.03.2015.
Elektroekooll company has all the registry entries e.g.
- GIOŚ registration,
- Permission for the transport of dangerous waste,
- Security clearance.
http://elektroekooll.pl/utylizacja-sprzetu-elektrycznego-i-elektronicznego
To Next Page
Loading...
Need help?
General
