Need help?Do you have a question about the Zmorph i500 and is the answer not in the manual?
General| Filament Diameter | 1.75 mm |
|---|---|
| Print Technology | Fused Filament Fabrication (FFF) |
| Nozzle Diameter | 0.4 mm (standard) |
| Filament Compatibility | PLA, ABS, PETG, TPU, Nylon |
| Connectivity | USB, Ethernet |
| Software | Voxelizer |
| Extruder Type | Single Extruder |
| Display | Touchscreen |
| Power Requirements | 110-240 V, 50/60 Hz |
Explains markings and warnings in the manual and on the device.
Provides overall safety guidelines, including placement, operation, and user restrictions.
Discusses safe working practices, ventilation, noise, and protective equipment during operation.
Details precautions for safe electrical connection, grounding, and component handling.
Highlights hazards associated with moving parts, tools, and print removal.
Warns about high temperatures of the extruder and heated bed, and precautions.
Provides guidelines for storing and transporting the Zmorph i500 safely.
Details the device's compliance with EMC directives and its operational conditions.
Defines what is covered and what is excluded under the warranty terms.
Explains the process and requirements for filing and accepting a warranty claim.
Specifies the timeframe for repairing defective products under warranty.
Clarifies the manufacturer's liability regarding product defects and damages.
Lists prohibited operations and misuse of the Zmorph i500 printer.
Illustrates the main parts and features of the Zmorph i500 printer.
Lists the detailed physical, printing, and electrical parameters of the device.
Describes the key mechanical components like X, Y, and Z axes, and their functions.
Enlists the compatible materials that can be used with the Zmorph i500.
Explains the various features and operational systems of the Zmorph i500.
Specifies the ideal environmental and space requirements for placing the machine.
Provides step-by-step instructions for safely unpacking the Zmorph i500.
Details the initial power-on procedure and first-time login instructions.
Explains how to remove safety fasteners before operating the machine.
Guides on how to install the air filtration components onto the printer.
Instructs on attaching the garbage collector to the machine.
Explains methods for transferring files to the printer via USB, Ethernet, or Wi-Fi.
Details the process for inserting and loading filament into the extruder.
Guides on how to unload filament from the extruder.
Outlines procedures for platform and nozzle calibration for optimal print quality.
Step-by-step guide to level the heated bed surface for accurate prints.
Describes how to calibrate the X, Y, and Z offsets between nozzles.
Covers system requirements and usage of Voxelizer software for print preparation.
Lists the necessary hardware and software specifications for Voxelizer.
Explains how to use Voxelizer views to arrange, scale, and prepare 3D models.
Details the steps to initiate a print job from the machine's interface.
Instructions on how to safely detach finished prints from the heated bed.
Guidance on removing support structures from printed models.
Steps for cleaning the waste collector to maintain printer performance.
Outlines general maintenance tasks and recommendations for keeping the machine in good condition.
Lists common maintenance tasks, tools, frequency, and solutions.
Step-by-step guide for replacing the extruder hotend assembly.
Instructions for replacing the cooling fans on the extruder module.
Procedures for replacing the tip of the waste remover.
Guides on how to replace the glass plate of the heated bed.
Instructions for replacing the air filtration system components.
Provides information on firmware updates and how to check the current version.
Step-by-step instructions for downloading and installing firmware updates.
Details how to submit a support request and what information to provide.
Lists common problems, their probable causes, and solutions.
Provides links to Zmorph's knowledge base, software, blog, and materials library.
To Next Page
