Zmorph i500 User Manual

Product Manual - ZMORPH i500 back to table of content >>
21
Machine specication
8.3 Components
Soware
Air ltration parameters
Other
Software Own dedicated software
Supported formats STL, OBJ
Output lter type HEPA/Carbon
Input lter type G4 (anti-dust)
Ventilation power 3.1 [W]
Filter dimensions 80 x 80 x 25 [mm]
Fitration control Temperature
Toolhead changing system Nozzle Lifting System
Nozzle Waste Remover Brass brushes and Teon scrapers
Filament loading Automatic Filament Loading System
End of material detection Filament sensors + RFID tags**
X axis
Y axis
Y axis
Y axis
X axis
single toothed-belt system driven by a stepper
motor and linear rail as guiding element.
Used for movement of Zmorph Dual Drive
Dual Extruder in X-axis. Must be periodically
lubricated to ensure a long life of the machine.
dual toothed-belt system driven by a stepper
motor and linear rails as guiding elements.
Used for movement of Zmorph Dual Drive
Dual Extruder in Y-axis. Must be periodically
lubricated to ensure a long life of the machine.

Zmorph i500 Specifications

General

Brand	Zmorph
Model	i500
Category	3D Printers
Language	English