Zmorph i500 User Manual

Product Manual - ZMORPH i500 back to table of content >>
24
Machine specication
8.4 List of 3D printing materials
8.5 Functionalities
▪ Closed-Loop System - controls the current position of the toolhead in X and Y axes. Whenever detects
the dierence between the real and theoretical position of the toolhead, applies a correction algorithm to
ensure the best quality of fabrication. It is also used as a protection system in case of severe positioning
problems (like blocked tool-head).
▪ Intuitive calibration process – Zmorph i500 is equipped in combined automatic and manual calibration
process, to ensure the best rst layer adhesion of the print and calibrate the Zmorph Dual Drive Dual
Extruder properly.
▪ Air Flow System – Zmorph i500 is equipped in two lter systems, G4 Input Air Filtration and HEPA/Carbon
Output Air Filtration.
▪ G4 Input Air Filtration – air input to the machine, it stops most of dust pollution from air.
▪ HEPA/Carbon Output Air Filtration - HEPA and Carbon lters, stops most air pollutants released during
machine operation.
▪ AFLS (Automatic lament loading system) - system which controls the lament loading into the Zmorph
Dual Drive Dual Extruder.
▪ Materials Station – Zmorph i500 is equipped in drawer, specially designed for lament storage during the
prints, it contains the two spoolholders for laments and Automatic lament loading system inside.
▪ Zmorph Dual Drive Dual Extruder - Zmorph i500 is equipped with an extruder with two separate hotends.
Zmorph Build Hotend with 0.4 mm nozzle and Zmorph Support Hotend with 0.6 mm nozzle
▪ Nozzle Lifting System – controls the change of the left and right nozzle during the work.
▪ Filament Flow System - ensures the continuity of the material ow in the Extruder. When material
shortage is detected the machine stops and pause the printing process and turns on the lament change
mode.
▪ Electric Door Lock – system which controls the door locks during the machine work.
Full list of materials and their specication you can nd in the Zmorph i500 materials library
▪ PLA
▪ PETG
▪ TPU 98
▪ ABS TECH
▪ PA
▪ ASA
▪ BVOH
▪ HIPS

Zmorph i500 Specifications

General

Brand	Zmorph
Model	i500
Category	3D Printers
Language	English