Zmorph i500 User Manual

Product Manual - ZMORPH i500 back to table of content >>
62
13. Firmware upgrades
13.1 General informations
Once in a while Zmorph releases a rmware update for its i500 model.
The current rmware version is available to download at the Zmorph Knowledge Base:
zmorph3d.com/support
To check the rmware version of the machine on the main screen from the main menu go to the
SETTINGS menu and choose “About Printer”.
Firmware upgrades

Zmorph i500 Specifications

General

Filament Diameter	1.75 mm
Print Technology	Fused Filament Fabrication (FFF)
Nozzle Diameter	0.4 mm (standard)
Filament Compatibility	PLA, ABS, PETG, TPU, Nylon
Connectivity	USB, Ethernet
Software	Voxelizer
Extruder Type	Single Extruder
Display	Touchscreen
Power Requirements	110-240 V, 50/60 Hz