Zmorph i500 - Specification

Product Manual - ZMORPH i500 back to table of content >>
20
Machine specication
Weight and Physical Dimensions
Electrical parameters
3D printing parameters
3D printer 703 x 507 x 1075 [mm]
Transport package dimensions 800 x 600 x 1200 [mm]
Transport weight ~ 70 [kg] *
3D printer weight ~ 55 [kg] *
Input current
110 [VAC] ~ 9-10 [A] 50/60 [Hz]
240 [VAC] ~ 5 [A] 50/60 [Hz]
Maximum power consumption 1000 [W]
3D printing technology FFF (Fused Filament Fabrication)
Toolhead Single material 1.75 [mm], Dual material 1.75 [mm]
Layer resolution 0.05 - 0.4 [mm]
Maximum extruder temperature 300 [°C]
Work area (single material) 460 x 300 x 500 [mm]
Work area (dual material) 440 x 300 x 500 [mm]
Maximum bed temperature 130 [°C]
Minimum wall thickness 0.4 [mm]
Dimensional accuracy +/- 0.2 [mm]
Work area leveling method Semi-automatic
Material form Spool, maximum ∅ 300x100 [mm]
Material diameter 1.75 [mm]
Nozzle diameter 0.4, 0.6, (0.8 - work in progress) [mm]
Support
Mechanically and chemically removed
- printed with build or support material
Connectivity USB (pendrive), Ethernet, WiFi
Available materials PLA, ABS, PET, Nylon, PVA, ASA, TPE, PC/ABS, HIPS
Third-party materials Supported
Work speed 10 - 110 [mm/s]
Travel speed 350 [mm/s]
8.2 Specication