Product Manual - ZMORPH i500 back to table of content
>>
31
Setting up Zmorph i500
9.6 Assembling the garbage collector
Take the Garbage collector out from the accessories box and open
the front door of the machine.
In the main menu choose
“MAINTENANCE” screen, and
select “MOVE AXES”
Choose “Z MOVEMENT” and
move the bed down. Make sure
the heated bed is not blocking
the accessibility to the garbage
collector holder by moving it
upwards or downwards. The
machine may ask you to home
the Z-axis rst, it will show the
warning on the LCD screen.
To Next Page
Loading...
