Do you have a question about the Zmorph i500 and is the answer not in the manual?
Filament Diameter | 1.75 mm |
---|---|
Print Technology | Fused Filament Fabrication (FFF) |
Nozzle Diameter | 0.4 mm (standard) |
Filament Compatibility | PLA, ABS, PETG, TPU, Nylon |
Connectivity | USB, Ethernet |
Software | Voxelizer |
Extruder Type | Single Extruder |
Display | Touchscreen |
Power Requirements | 110-240 V, 50/60 Hz |