Product Manual - ZMORPH i500 back to table of content
>>
22
Machine specication
Z axis
Materials Station
Heated bed
axis driven by single stepper motor coupled
with trapezoidal screw and high-quality
Iglidur
®
trapezoidal nut. Guiding elements
are two linear rails. Used for movement of
heated bed in Zmorph i500 machine. Must be
periodically lubricated to ensure a long life of
the machine.
Zmorph i500 is equipped in drawer, specially
designed for lament storage during the
prints, it contains the two spoolholders for
laments and Automatic lament loading
system inside.
Zmorph i500 has a Heated bed with work
are up to 460 x 300 x 500 [mm], it can be
preheated to 130 °C. Bed design allows
exchanging the heated bed glass really easily.
To Next Page
Loading...
Need help?
General
