31
The SUPER G+ will not stay on the bottom of the
pool :
c make sure the hose weight is correctly installed on the hose
2 metres from the automatic pool cleaner (see page 23) ;
c if your pool is more than 2 metres deep, fit a second hose
weight 2 metres from the appliance ;
c test and increase flow rate if necessary (see page 27).
The SUPER G+ jams against the steps :
c connect the hose to the vacuum point furthest from the
steps ;
c shorten the hose to prevent it coming to rest on the steps.
c adjust waterflow to direct the hoses away from the step area.
The SUPER G+ moves very slowly and air bubbles
appear in the flow :
c check the system is sucking in air: between the appliance
and hose, between each of the hose sections, between the
hose and the valve, between the valve and the skimmer.
The SUPER G+ climbs above the water :
c reduce the flow rate (see page 27).
c add an additional hose weight just above the deflector wheel.
The SUPER G+ jams on the main drain :
c close the main sump.
8
7
6
5
To Next Page
Loading...
