23
Connect the hose to the automatic pool cleaner
#
.
c A hose weight is provided to reduce the buoyant effect of the hose.
The buoyancy of the hose tends to lift the SUPER G+ especially in
deeper water. Ensure the disc sets flat on the pool surface by
adjusting the hose weight about 2m
from the automatic
pool cleaner.
INSTALLATION
IMPORTANT
You can connect your SUPER G+ to a (or the) skimmer
point, or to the vacuum point. You are strongly advised to
connect it to a skimmer point for maximum clea-ning
efficiency.
$
#
Make sure the skimmer, pump basket and filter are clean.
Adjust the inlet jets so that they point towards the bottom of the
pool.
Close the main drain on the bottom of your pool.
Turn on the pool drain.
Fill the SUPER G+ hose with water using the flow from the
inlet jets ensuring that the hose remains beneath the surface of the
water during and after these procedures
$
.
5
4
3
2
1
To Next Page
Loading...
