H0396500.A3.EN–2013‐01 3
• Donotunrolltheentirelengthofthecableintothepool.
• Placetherequiredlengthofcableinthepoolandplacetherestonthesideofthepool.
Donotuseanextensioncordtoconnectthecontrolunit.
• The cleaner's control unit is fitted with an automatic cut‐off system in order to avoid eventual
overheatingduetoprolongedexposuretodirectsunlight.
• The cleaner's control unit is resistant to splashes of water but is not watertight. Never immerse the
controlunit.
Oncethecleanerisimmersed,letitsinkandsettleonthepoolbottomonitsown.
Toavoideventualinjuries,neverstartthecleanerifthecoverisnotinstalledandlocked
ontothecleanerbody.
USE
3.1.RECOMMENDATIONSFORUSE
•Useyourcleanerasoftenaspossible.Youwillbenefitfromapoolthatisalwayscleanandthefilterwillclog
moreslowly.
•Thecleanermustoperateinpoolwaterhavingthefollowingcharacteristics:Chlorine<2mg/l,pHbetween
6.8and7.6,temperaturebetween10°Cand35°C.
•Donotuseyourcleanerduringshockchlorination.
•Youcanstartthepoolfilt
eringwhenthecleanerisoperatinginordertoimprovethegeneralpoolcleaning.
•Cleanthefilteraftereachcleaningprogramme.
•Neverleavethecleanerinthewaterpermanently.
• At the end of each cycle remove the cleaner from the pool.
Before stowing the cleaner unravel the cable
startingfromthecleaner.
3.2.IMMERSINGTHECLEANER
3.3.POWERSUPPLY
•Connectyourcleaner'sfloatingcabletothecontrolunitandscrewtheconnectoruntilitiscorrectlyfitted.
Donottightentoomuch.
•Afterhavingconnectedthecontrolboxtoapoweroutlet,the
greenlightshowsforashortperiodinordertoindicatethatthe
cycle is ready to start. Do not attempt to start your cleaner
beforetheindicatorlights.
3.4.OPERATION
•Tostarttherobot,presstheON/OFFbuttononthecontrolunit.Thegreenindicatorlights
andthecleanerstartsafterafewseconds.
•IfyouwishtostopthecleanerwhileitisoperationalpresstheON/OFFbutton.
EN