Zodiac VORTEX 1 - Cleaner Not Moving (No Light); Indicator Light Flashing; Poor Debris Suction

H0396500.A3.EN–2013‐01 5



Contactyourresellerforinformationontheavailabletypesoffilter.

4.3.CHANGINGTHEBRUSH
ThecleanerisfittedwithaPVCbrushwithawearindicator.Inordertomaintaintheefficiencyofyourcleaner
youshouldreplacethebrushassoonasthewearindicatorisreached(eveniftherollerisnotdamaged).

•Overturnthecleanertoaccessthebrush
• Push the arm of the brush in order to
removetheshaftfromitshousing(1).
• Lift the brush and remove it from the
cleaner(2).
• Place the shaft of the new brush in its
housing.
• Place thesecond shaftof the new brus
h in
itshousing.

4.4.CHANGINGTHEBANDS






4.5.RECYCLING
Thissymbolonanewappliancemeansthattheequipmentmustnotbethrownaway,itwillbe
selectivelycollectedforthepurposeofreuse,recyclingorcreatingvalue.Ifitcontainssubstancesthat
arepotentiallyharmfultotheenvironment,theywillbeeliminatedorneutralised.
Askyourresellerabouthowtore
cycleyourapplianceandthebodi
esthatcandoso.
TROUBLESHOOTING

5.1.Thecleanerdoesnotmoveandtheindicatorlightisoff
•Thecleanerisstoppedandwaitingforanewcleaningcycletobelaunched.
•Disconnectthepowersupplybox,waitforatleast15secondsandthenreconnectit.Makesurethelightturns
onbriefly.Ifthelightdoesnotturnon,checkthatthepowersupplyiscorrectbyco
nnectinganother appliance
totheoutlet.Ifthepowersupplyiscorrectcontactyourreseller.
5.2.ThelightflasheswhenyoupresstheON/OFFbutton
•Unplugthepowersupplyboxfromthemainsoutlet.
•Disconnectthecleanerfromthecontrolunitandreconnectitfollowingtheinstructionsinthisdocument.
•Reconnectthepowersupplyandcheckthatthelightswitcheson.
•PresstheON/OFFbutton.Ifthelightflashescontactyourreseller.
5.3.Thecleanerdoesnotsuckindebris
•Removethecleanerfromthepoolanddisconnectthepowersupply.
•Removeandcleanthefilter.
•Checkthatthepropelleris notdamaged.Ifthepropellerisdamageditmustbereplaced.
 


 


EN