Operation and Debugging 20X Bar-tacking and Button Sewing Machine(LCD N)
65
Note: When sewing LED is off, press key to
enter Copy/Delete menu
2.7 Memory Switch Activation and Change
1) Set input mode
When sewing LED is off, memory switch data can be
changed.
2) Enter data editing interface
Press key to display the mode interface
(operator level).
Press key to select “01 U parameter”
and press key to enter memory switch data
interface.
3) Select data to be changed
Press key to select the data item to be
changed.
4) Change data
Press key to increase or decrease the
set value.
5) Save and quit
After completing data change, press key to
save and quit, and return to mode interface. Press
key again to return to sewing interface.
2.7.1 User Parameter Setting List
Max Speed of Sewing
（it can be set by an increment of
100rpm）
To Next Page
