- 16 -
Whole Grain
(Basic, Wheat,
Quick Wheat)
Basic Steps
WHOLE GRAIN(BASIC, WHEAT, QUICK WHEAT)
1-5. Follow the same procedure as steps 1-5 for Basic Bread (see page 11).
6. Select the desired setting.
1) Press the SELECT COURSE key to set the arrow (5)
to "Basic Wheat" or "Quick Wheat."
2) Press the STA
RT/RESET key.
• T
he Operation Light will go on and the first
process is shown (i.e. PREHEAT
).
• A
s the process continues, the indication advances
from PREHEAT,
KNEAD, RISE then to BAKE.
• T
he ADD indicator will flash for five minutes until
the KNEAD process is complete. W
hen it’s time to
add ingredients such as raisins or nuts, the unit will
beep for the first 30 seconds of the indicator
flashing. Open the lid and add appropriate
ingredients according to the recipe
• T
he unit will count down remaining time at one-
minute intervals until the read is done.
7-9. Follows the same procedure as steps 7 – 9 for Basic Bread (see page 12).
If you want to use the timer, follow the same procedure as for using the timer for Basic Bread (see page
11). (The timer can be used with the Basic Wheat setting only.)
! CAUTION !
The unit is extremely hot
when baking. Be careful.
To Next Page
Loading...
Need help?
General
