Need help?Do you have a question about the Zontes ZT125-Z2 and is the answer not in the manual?
General| Brand | Zontes |
|---|---|
| Model | ZT125-Z2 |
| Category | Motorcycle |
| Language | English |
Main harness, dump switch, relay, flasher.
Flameout switch, horn, ignition coil.
ECU, relay.
Rectifier, Buzzer.
Line clamp, side cover round glue, fuel tank liner limit glue.
Lower plate component.
Frame, side bracket.
Disassemble guard bar assembly.
Lower shroud bracket, engine.
Air filter filter, Carbon canister.
Disassemble throttle valve body component.
Replace air filter element.
Rear mud board.
Demolition and adjustment of rear shock absorber.
Disassemble the rear rim, sprocket seat, and sprocket.
Disassembled rear rim component.
Disassembled rear fork component.
Replace the rear brake pads.
Add brake fluid to the rear brake main pump.
Adjust shift lever and brake pedal height.
Disassemble the right foot support component.
Decomposition brake pedal component.
Disassemble the right pedal component.
Disassemble left foot support and shift lever.
Decomposition shift lever and front left pedal.
Disassemble the left footrest component.
Change engine oil and oil filter.
Add coolant to the cooling system.
Change coolant.
Disassemble auxiliary water tank and water pipe.
Water tank component.
Adjust throttle/clutch cable clearance and light height.
Replace the clutch cable.
Replace the throttle cable.
Adjust the steering.
Remove rearview mirror, handle rubber sleeve, balance block.
Add brake fluid and adjust rocker.
Replace the front brake pads.
Disassemble the front wheel, disc brake, and axle.
Front mud board and wheel speed sensor.
Remove the headlight.
Disassemble headlight component.
Disassemble headlight bracket, head cover rear shell.
Disassemble speedometer and bracket.
Disassemble left rearview mirror, handle rubber sleeve, left switch.
Disassemble directional lever.
Disassemble front shock absorber and upper plate.
Disassemble uplink plate and direction handle block.
Disassemble ABS hydraulic control unit and bracket.
Disassemble ABS brake system.
Disassemble ABS brake system.
Disassemble ABS brake system.
Disassemble the fuel tank component.
Disassemble fuel tank cover component.
Disassemble fuel tank cover component.
Disassemble fuel tank cover component.
Disassemble fuel tank and fuel pump.
Disassemble surrounding component.
Decompose side cover component.
Decompose side cover component.
Disassemble Rear cover component.
Disassemble rear armrests and shelf components.
Disassemble the taillight component.
Disassemble rear fender component, bracket, and cover.
Disassemble rear mud board and turn signal.
Disassemble battery and electric device box cover.
Disassemble battery, switch, and charging precautions.
Remove and assemble the cushion.
Remove the muffler component.
Disassemble muffler decorative cover.
To Next Page
