Do you have a question about the Zontes ZT125-U and is the answer not in the manual?
Fuel System | Electronic fuel injection |
---|---|
Transmission | 6-speed |
Rear Suspension | Mono shock |
Fuel Tank Capacity | 12.5 liters |
Seat Height | 795 mm |
Weight | 150 kg |
ABS | Yes |
Maximum Power | 14.7 hp @ 9, 000 rpm |
Max Torque | 13 Nm @ 7, 000 rpm |
Front Brake | Single disc |
Rear Brake | Single disc |
Front Suspension | Upside down fork |
Covers the main harness, flasher, dump switch, relay, seat lock, and canister solenoid valve.
Information on the ECU, starting relay, and associated components.
Procedures for disassembling shroud brackets and hanging pieces for U frame.
Details on frame protection, guard bars, and lower brackets for U1 frame.
Instructions for removing the air filter and carbon canister assembly.
Details on the high-pressure oil pipe and throttle valve body assembly.
Procedures for rear fender and mud board assembly.
Procedures for removing, installing, and adjusting the rear shock absorber.
Steps for rear wheel assembly and sprocket bracket assembly.
Covers disc brake plate, ABS ring, tire, rim, and maintenance procedures.
Steps for disassembling and changing the front disc brake pads.
Instructions for changing engine oil and oil filter, including procedures and cautions.
Procedures for checking and adding coolant to the auxiliary water tank.
Steps for draining and refilling the cooling system with new coolant.
Adjusting throttle/clutch cables and front fork light height.
Procedures for removing and installing the clutch cable.
Steps for disassembling and installing the throttle cable.
Instructions for adding brake fluid and adjusting the rocker arm.
Steps for replacing front brake pads and caliper components.
Procedures for removing front wheel, brake disc, ABS ring, and tire.
Procedures for uplink board, shock absorber, and faucet lock removal.
Procedures for hydraulic control unit components and protective covers.
Procedures for removing fuel tank, cushion, and side covers.
Procedures for removing the muffler and related parts.