Need help?Do you have a question about the Zontes ZT125-GK and is the answer not in the manual?
General| Displacement | 124.7 cc |
|---|---|
| Transmission | 6-speed |
| Fuel System | Electronic Fuel Injection |
| Cooling System | Liquid-cooled |
| Seat Height | 795 mm |
| Tires Front | 110/70-17 |
| Tires Rear | 130/70-17 |
| ABS | Dual-channel ABS |
| Engine Type | Single-cylinder, 4-stroke |
| Power | 14.7 hp @ 9000 rpm |
| Fuel Tank Capacity | 20 liters |
| Brakes | Disc (front and rear) |
| Rear Suspension | Mono shock absorber |
| Front Suspension | Upside-down telescopic fork |
Details on main harness, dump switch, relay, and flasher.
Covers horn, flameout switch, ignition coil, and shut down switch.
Explains ECU, relay, and related components for starting.
Focuses on flasher, buzzer, rectifier, and engine left rear cover.
Covers fuel tank liner, side cover cushions, and waterproof plugs.
Details disassembly and assembly of the steering column.
Instructions for checking cushion loop and servicing side support.
Covers frame protection and guard bar assembly steps.
Details shroud bracket and hanging piece installation for engine combo.
Procedures for YH canister solenoid valve and air filter replacement.
Covers high-pressure oil pipe and throttle valve body assembly.
Step-by-step guide for replacing the air filter element.
Instructions for removing the rear inner mudguard and bracket.
Procedures for removing and adjusting the rear shock absorber.
Covers rear wheel assembly and sprocket bracket assembly.
Details disc brake plate, ABS gear ring, and tire/wheel removal.
Steps for rear fork assembly and rear fork rear-resistant block.
Guide for replacing front brake pads and caliper mounting plate.
Procedure for adding rear brake fluid and checking system.
Adjusting gear shift rod and brake pedal height for comfort.
Steps for right foot pedal component removal and oil cup.
Covers rear disc brake pump, pedal assembly, and oil cup holder.
Details R, front and rear pedal disassembly and after-sales parts.
Instructions for L, foot pedal holder assembly and gear shift rod.
Covers L, Foot pedal component, after-sales parts, and gear shift rod assembly.
Details L, rear foot pedal disassembly and after-sales parts.
Procedures for draining engine oil and changing the oil filter.
Steps for checking and adding coolant to the auxiliary water tank.
Covers draining cooling liquid and adding new coolant.
Details auxiliary water tank, water pipe, and water tank component removal.
Covers water tank component and bracket removal procedures.
Adjusting throttle/clutch cables and light height.
Step-by-step guide for removing and installing the clutch cable.
Procedures for disassembling and installing the throttle cable and handlebar switch.
Steps for checking and adjusting the steering system.
Covers hand guard, rearview mirror, and right hand switch removal.
Procedure for adding front brake fluid and adjusting rocker arm.
Guide for replacing front brake pads and caliper mounting plate.
Covers tire, wheel, brake disc, and ABS ring gear removal.
Details wheel speed sensor, brake caliper, and front mud board removal.
Covers front disc brake guard and front mud board component removal.
Procedures for headlight assembly and decorative cover removal.
Details turn signal and headlight bracket removal.
Covers headlight component removal and decoration cover.
Steps for removing the speedometer assembly and instrument stand.
Covers rearview mirror, switches, and hand guard removal.
Instructions for removing directional components and handle bar.
Details uplink board, shock absorber, and faucet lock removal.
Covers uplink plate and direction handle block assembly.
Procedures for hydraulic control unit components.
Covers brake fluid release for ABS system.
More procedures for releasing brake fluid in the ABS system.
Details RMC-HU, wheel speed sensor, and RC-HU brake system components.
Steps for removing fuel tank front grille components.
Procedures for removing upper decorative covers.
Covers surrounding components and front grille removal.
Steps for removing the middle cover component.
Details USB charging cable and front grille standard component removal.
Procedures for removing the fuel tank assembly and related parts.
Steps for removing fuel tank decorative covers.
Covers fuel tank middle cover, lock, and cover assembly.
Instructions for fuel tank cover assembly.
Procedures for removing left and right side covers.
Steps for removing and installing the rear armrest assembly.
Procedures for removing the right rear tail cover and antenna.
Instructions for removing the taillight assembly.
Covers rear fender assembly and license plate bracket removal.
Details turn signal and license light assembly.
Procedures for removing the electrical device box cover and battery.
Steps for removing the electrical device box and battery holder.
Covers PKE component removal from the battery holder.
Procedures for removing and assembling the seat cushion.
Steps for removing the muffler component and exhaust seal pad.
Details muffler tail cover and anti-scalding component removal.
To Next Page
