Name: Zontes ZT125-GK
Brand: Zontes
Rating: 4 (1 reviews)

To Next Page

To Previous Page

12-CUSHION COMPONENT

CHK

ADJ

NO. PART NO. PART NAME QTY REMARKS

4120100-003000 150-GK cushion 1

1244100-024000

ZT250

－

S cushion front rubber

3 1244100-022000

ZT250

－

S cushion rubber

1244100-025000

ZT250

－

S round cushion rubber

Fig.1 CUSHION

COMPONENT

Cushion component

PROCEDURE:

●Remove the cushion

Press the unlock button shortly.After the power-on self test is completed, press the "SEAT" button briefly to

open the electronic cushion lock.

Grasp the seat cushion⑴ and pull it diagonally upwards. At the same time, remove the cushion by moving the

rear part of the cushion from side to side.

●Assembly cushion

When assembling the cushion, check whether all the cushion rubbers are complete. Insert the front part of the

cushion① first. After the assembly is in place, shoot the rear part of the cushion firmly. When you hear the

"click" sound, it indicates that the cushion lock has been assembled.

●Cushion rubber purchased separately

The corresponding installation position is shown in the lower left figure.

CAUTION:

●The motorcycle should be fixed before operation.

●Cushion can cause accidents if it is not installed properly.

Questions and Answers:

Need help?

Do you have a question about the Zontes ZT125-GK and is the answer not in the manual?

Zontes ZT125-GK Specifications

General