To Next PageTo Next PageWhat to do if the patch does not change on my Zoom Music Pedal?
If the patch on your Zoom Music Pedal isn't changing, first check if the patch call method is set to pre-select. Also, consider that continuous operation time is 28 hours with alkaline batteries but only 8 hours with manganese batteries. The use of alkaline batteries is recommended.
Why does my Zoom Music Pedal have no power?
If your Zoom Music Pedal has no power, ensure you are using the correct ZOOM AC adapter for 9 V DC, 300 mA with a center minus plug (ZOOM AD-0006).
General| Type | Multi-Effects Processor |
|---|---|
| Sampling Frequency | 31.25 kHz |
| A/D Conversion | 16-bit |
| D/A Conversion | 16-bit |
| Input Impedance | 1 MΩ |
| Output Impedance | 1 kΩ |
| Effects | Overdrive, Distortion, Chorus, Flanger, Phaser, Delay, Reverb |
| Input | 1/4" (6.35 mm) Jack |
| Output | 1/4" (6.35 mm) Jack |
| Power Supply | 9V DC (AC adapter) |
| Dimensions | 50mm (H) |
Explains warning and caution symbols used to prevent accidents.
Covers safe operation using AC adapter and batteries, including precautions.
Advises on avoiding extreme environments and safe handling of the device.
Warns against opening or modifying the unit to prevent damage.
Highlights 33 effects, 9 simultaneous effects, and 36 rewritable patches.
Describes the redesigned interface with large controls for easy operation.
Mentions the integrated function for quick and precise instrument tuning.
Explains operation via AC adapter or batteries for versatility.
Notes compatibility with optional foot switches and expression pedals.
Describes improvements over the previous model, including new effects.
Explains effect modules as combinations of single effects like COMP, DIST, ZNR, AMP SIM.
Describes effect types within modules, such as chorus or flanger within MOD.
Explains adjustable parameters controlling effect intensity and tonal characteristics.
Defines patches as stored combinations of effect module settings, up to 36.
Explains banks as groups of six patches, labeled A through F.
Differentiates between play mode for using patches and edit mode for modifying them.
Details controls on the top panel, including selectors, display, and foot switches.
Explains input, output, and AC adapter/control jacks on the rear panel.
Steps to power on the unit using batteries or AC adapter.
How to ensure the unit is in play mode for patch selection.
Using foot switches to navigate between patches in play mode.
Using [+] / [-] keys to switch between banks A through F.
How to control the overall output volume of the unit.
How to switch effects off for tuning using foot switches.
Steps to tune the guitar using the display and reference pitch.
How to fine-tune the tuner's reference pitch (A4 frequency).
How to exit tuner mode and resume normal operation.
Using the PLAY/EDIT selector to choose parameters for editing.
Using [+] / [-] keys to adjust parameter settings.
Toggling effect modules on or off using foot switches.
How to return to play mode after editing.
How to change patch selection from direct to pre-select.
Selecting the desired patch in pre-select mode.
Activating the selected patch in pre-select mode.
How to revert to the default direct patch selection method.
How to connect and use the optional foot switch for bank changes.
How to connect and use the expression pedal for real-time control.
Restores all patches to factory default settings.
Restores a specific patch to its original factory condition.
Explains how to interpret the effect type and parameter listings.
Adjusts the overall volume of the patch.
Details basic parameters for compressor and distortion effect modules.
Details extended parameters for the distortion module.
Covers EQ, phase shift, and contour effect modules and their parameters.
Explains ZNR noise reduction and amp simulator settings.
Details basic parameters for chorus, flanger, and tremolo effect types.
Covers pedal variations and serial connections for the MOD module.
Details pitch shift patterns and DLY/REV module parameters.
Details delay, echo, and reverb effect types and their parameters.
Advises on avoiding interference and potential data corruption.
Provides instructions for cleaning the unit safely without damage.
Guides on what to do if the unit does not power on.
Advises checking patch call method if patches don't change.
Suggests checking the AC adapter for noise reduction.
Explains battery life differences between alkaline and manganese types.
