24 ADSL X6 Quick Start
• Verify that the TCP/IP properties on all your computers are
correct. Open the Internet Protocol (TCP/IP) Properties
dialog box (depending on your computer, this may just be
called TCP/IP Properties) and ensure the following is
selected, depending on whether you are using dynamic
(DHCP) or static IP addressing:
¾ [MOST USERS] If you are using DHCP: Ensure that
Obtain an IP address automatically is selected and that
either Obtain a DNS server address automatically or
Enable DNS is selected. All fields should be blank.
¾ If you are using a static IP address: Verify the
following, depending on your computer:
Windows 2000/XP: Ensure that Use the following
IP address and Use the following DNS server
addresses are selected and that the correct IP
address, Subnet mask, Default gateway, and
Preferred DNS server values appear.
Windows 98/Me: Ensure that Specify an IP
address is selected and that the correct IP Address
and Subnet Mask values appear. On the DNS
Configuration tab, ensure that Enable DNS is
selected and that something appears in the Host box.
(If not, enter any name, word, or combination of
letters and numbers.) Ensure that the DNS Server
Search Order box contains 10.0.0.2.
Note:
If you need help accessing your computer’s TCP/IP
settings, refer to the User’s Guide on the CD for more
detailed instructions or go to
www.zoom.com/techsupport/adsl/adsl_x6.shtml
To Next Page
Loading...
