7
Typically, you plug a phone or fax into the filter’s PHONE
jack and plug the filter’s LINE end into the wall jack.
Congratulations! You have installed the hardware. Now continue
with the next section, Establishing Communication.
Step 3: Establishing
Communication
You must set up the X6 so that it can communicate with your
Internet service provider. To do this, you must use the Zoom
Configuration Manager.
1
11
1
Log in to the Zoom Configuration Manager from the
computer on which you installed the X6 software:
a
aa
a
On your desktop, double-click the Zoom icon.
This icon should have been placed there automatically
when you installed the software earlier. (If the Zoom icon
is not there: Open your Web browser and, in its address
bar, type http://10.0.0.2 and then press the Enter key on
your keyboard.)
Note:
Even though you are not yet configured to browse the
Internet, your Web browser can access the Web interface
of the X6 modem.
To Next Page
Loading...
